Full set of Stone Equipment Price

Full set of Stone Equipment Price

What equipment is used to produce stones? How much is the price of a full set of stone equipment? This article will explain to the users who will open the stone factory.

What equipment is used to produce stones?

The stone is processed by the crushing equipment of the stone. What equipment is used is generally determined by combining the properties of the raw materials, the user's output demand, the site environment, etc. The following is a summary of the analysis and suggestions of professionals:

Raw material properties

The properties of raw materials mainly depend on two indicators, one is shape and the other is hardness. Because the feed ports of different stone production equipment are different, the size of stones that can be treated is limited. For example, the jaw crusher is a large feed port in stone equipment, it can handle stone materials of about 1000 mm, and the cone crusher is single cylinder. The series of cones can handle stones of about 500 mm, while the other series are generally one hundred and two hundred millimeters; in addition, the hardness of the stone, the general cone crusher is suitable for handling high hardness stones, and the impact crusher is suitable for handling soft stones.

stone crusher

Therefore, professionals suggest that if the raw materials are large, it is necessary to work with two machines, primary (chopper crusher) equipment + secondary (impact crusher / cone crusher) equipment, which decides whether to use a impact crusher or a cone crusher. The hardness of the stone is determined. Of course, the crusher is not able to handle the hard stone, but the wearing parts wear faster. Therefore, it is better to use the cone to break the hard material. In addition, if it is a soft material, it can also be used in a single machine, using a once-built heavy hammer crusher.

User's production demand

The output of the equipment for producing stone is not the same. For example, the output of the jaw crusher ranges from 1 to 1000 t/h, the output of the cone crusher ranges from 27 to 2181 t/h, and the impact crusher is 30-800 t/h. There are different series and models of equipment, each of which has a rated output range, and users can choose according to the actual situation.

Therefore, it is recommended to choose a model that matches the size of your own stone factory, slightly exceeding the actual production demand, but not too much. In addition, for the large-scale stone production line of two-machine operation, it is recommended to establish a secondary material silo between the two equipments, so as to ensure the smooth production of the production line as much as possible, and the entire production line will not be stopped due to the overhaul of a certain equipment.

Site environment

This is mainly for the configuration of fixed stone production equipment or mobile stone production equipment. Generally, fixed stone production equipment needs infrastructure, installation, and then each equipment is connected by conveyor. It takes a certain amount of money and time. Larger, if you want to change the field, you have to disassemble and install again, it takes more time; while the mobile production stone equipment does not need infrastructure, basically the equipment is needed on the mobile rack, the whole machine is flexible and the transition is convenient. The footprint is still small.

Therefore, it is recommended that the Shizi factory be fixed and large-area using fixed stone production equipment, and the mobile stone production equipment is applicable when the site is relatively scattered and the environment is relatively bad.

Equipment

B6X Belt Conveyor
B6X Belt Conveyor
XSD Sand Washer
XSD Sand Washer
F5X Vibrating Feeder
F5X Vibrating Feeder
S5X Vibrating Screen
S5X Vibrating Screen
K Track-type Mobile Crusher
K Track-type Mobile Crusher

Solutions

Request A Quotation