Double Acting Jaw Crusher

Double Acting Jaw Crusher

Negative compound pendulum support research and development of dual-chamber double-acting jaw jaw crusher began in 1992, starting from the lab, in reference to foreign relevant technical information, as well as models for the domestic part of the mining, cement, glass and other industries full investigation after preliminary laboratory study of this subject a small experiment, in several design review of the conditions, we performed on the basis of its mechanical structure a comprehensive study and master the relevant double acting jaw crusher comprehensive relevant data and design methods, and for small prototype design.

After the main technical parameters of the prototype of a comparative analysis confirmed. These include: a single, binaural (left and right) of the movable jaw mosaic structure, the nesting population adjustment method, the movable jaw reset setting method, moving jaw wobble frequency, eccentricity, transmission power, crushing force and other practical design guiding ideology in principle to "swing high frequency, small eccentricity, finely curved" deep cavity. Mechanical properties required to achieve safe and reliable, the nesting population adjustment convenient and flexible, thin and uniform crushing ratio, product size, lining long life, low energy consumption.

Development of jaw crusher, the analysis of its structure also derive several crushers, such as: single, dual-chamber rotary crusher. This single, dual-chamber rotary crusher can be considered as jaw crusher product variations, which consists of a fixed concave (single, double) and an eccentric rotary roll crusher liner composed of a fixed concave (single, double) broken liner substituted jaw crusher fixed jaw to replace the eccentric rotation of the roller jaw crusher moving jaw, with its similar structure to complete the work jaw crusher crusher. Based on the above analysis, we selected the new jaw crusher as the main object of study, research and development, focusing on structure, and strive to old jaw crusher new technology. On the basis of its technical performance will be improved and enhanced in order to be able to apply the final promotion of industrial production for the purpose of their research to come up with new characteristics in the cavity optimization design, develop negative compound pendulum support double acting jaw crusher.

Double Acting Jaw Crusher Notes

  1. After double acting jaw crusher normal operation, only feed production.
  2. The material to be crushed should be evenly added to the crusher cavity should be avoided lateral feeding or feeding filled to avoid unilateral overload or subjected to overload.
  3. When double acting jaw crusher work properly, bearing temperature rise should not exceed 30 ℃, the maximum temperature not exceeding 70 ℃. When the temperature exceeds the above, it should be immediately stopped, identify and eliminate the cause.
  4. Before stopping, you should first stop feeding, to be broken cavity material is fully discharged before power is turned off.
  5. When broken, as a result of the crushing cavity material obstruction caused by parking, should immediately turn off the power to stop running, to clean up after the crushing cavity material before re-starting.
  6. After the end of the jaw wear can turn around and use.
  7. After crushing machine used for a period of time should be tight sleeve loose and damage the machine.

Equipment

B6X Belt Conveyor
B6X Belt Conveyor
XSD Sand Washer
XSD Sand Washer
F5X Vibrating Feeder
F5X Vibrating Feeder
S5X Vibrating Screen
S5X Vibrating Screen
K Track-type Mobile Crusher
K Track-type Mobile Crusher

Solutions

Request A Quotation