The ultra-fine mill is a machine with high heat in the milling equipment industry and is widely used in mining, powder, cement and other fields. There are two main models of SBM ultra-fine mills to meet the needs of users. There is a certain difference between the performance of the ultra-fine powder mill and the ultra-fine vertical mill. From the perspective of composition structure, operating principle, and the amount of finished product processing in the unit, the two have their own characteristics. The difference between the two, you can choose according to the actual requirements of the processing line.
SBM ultra-fine powder mill is mainly composed of inlet and outlet, blower, analyzer, powder separator, grinding device, bracket, motor, etc. SBM ultra-fine vertical mill is a large-scale grinding equipment, mainly including powder separator, hydraulic cylinder, Conveyor, host, inlet and outlet, grinding device, pressure device, etc. It can be seen from the internal composition structure that the working principles of the two are different. When the ultra-fine powder mill grinds the material in the grinding cavity, the grinding roller is constantly rotating, and the material is squeezed and crushed into a powder state in the ring channel These powders are sieved by the powder separator to meet the specifications, and then the finished product can be produced. When the ultra-fine vertical mill is working, the material is sent to the center of the grinding disc of the grinder. During the upward movement, it is crushed by the grinding roller, and the material that is not completely crushed will form a crushing between the particles of the material bed.
The feed port of the SBM ultrafine powder mill can process 0-20mm materials, and the processing capacity is within the range of 500-25000 kg per unit time, while the feed port of the ultrafine vertical mill can process 0-10mm materials, per unit time The processing capacity is in the range of 5-18 tons. In addition, the electric power of the two is also different. When selecting equipment, users must not only follow the principle of matching the particle size of the material with the inlet, but also consider the power support in their own sand and gravel plant.