Gypsum Powder Making Plant

Gypsum Powder Making Plant

gypsum powder making plant production line describes the basic process

The gypsum powder mill crusher breaks the large gypsum ore into small particles of less than 30mm and transports it to the mill through the separator product. The fineness of the ground gypsum powder is calcined in the boiling furnace, and the grinder rests until it passes back. The calcined gypsum powder is qualified for storage or sent to the clinker storage product workshop.

Gypsum powder factory - The gypsum board production line project uses gypsum and gypsum from the feed port to make effective contact with the outer wall of the cylinder tube. The fluidized bed furnace flue gas desulfurization gypsum is used as the heating calcination medium, and the calcined product collected from the discharge port. Due to the indirect heat exchange, the cylinder can be a high vapor partial pressure, which has a positive effect on the quality of the product. In addition, the gypsum does not directly contact the heating medium to maintain the maximum purity of the product. The indirect thermal rotary calcining machine technology can be strictly controlled to effectively control the strength of gypsum ash burning into hemihydrate gypsum.

Gypsum Powder Making Plant structural characteristics of the system

  1. Gypsum powder plant with advanced technology, process maturity and stability in the domestic gypsum board production line is widely used .
  2. Gypsum powder plant selection of equipment quality, reliability, and overcapacity has strong expansion capability; low maintenance, easy to maintain.
  3. Gypsum powder plant tightness, efficient dust, no dust pollution.
  4. Gypsum Powder Making Plant with integrated automation and control systems, field staff and reduce labor intensity.

Gypsum Powder Production Line

Gypsum powder making plant production line with a European version of the trapezium mill, dust and other advanced equipment and the entire production line to achieve a truly automated production technology to produce good quality products, superior performance and high purity. General gypsum powder production line manufacturing process can be summarized as gypsum stone crushing system, calcined system and grinding aging system of three processes. Broken equipment can be used jaw crusher, impact crusher, etc.; calcined gypsum construction equipment according to the choice of continuous or intermittent use of rotary kiln. Continuous or intermittent vertical pan, oil pan of boiling furnaces and dryers, etc.; calcination process can be divided after the first burning mill grinding process and after the first firing two mainstream production process. Grinding equipment can be used vertical mill, Raymond mill, etc., and the European version. We will provide the most appropriate solutions and equipment to develop according to your actual needs.

Equipment

B6X Belt Conveyor
B6X Belt Conveyor
XSD Sand Washer
XSD Sand Washer
F5X Vibrating Feeder
F5X Vibrating Feeder
S5X Vibrating Screen
S5X Vibrating Screen
K Track-type Mobile Crusher
K Track-type Mobile Crusher

Industry News

Request A Quotation