Impact Crusher And Hammer Crusher

Impact Crusher And Hammer Crusher

The impact crusher and the hammer are both broken equipment, and they are similar in appearance and internal structure, but the two belong to different types of production machines. Here is the difference between the two.

When customers purchase mining equipment, they first need to clearly understand the differences and uses between different types of equipment in order to make better choices. Counter-crushers and hammers are common mining equipments. The full name is the impact crusher and the hammer crusher, which are similar, and the similarity between the structure and the appearance is relatively high, which is not easy to distinguish, but in essence, the two are used as different devices, here Let me introduce how to distinguish between the two.

1. From the internal structure, the impact crusher has a larger crushing space, and its hammer makes full use of the function of the rotor to rotate, that is, the material is crushed from the bottom up and thrown onto the counterattack plate. The self-shock pulverization caused by the collision of materials on the back, the composite crushing function is more, the energy utilization rate is high, the electricity consumption per unit is low, the metal consumption is small, and the hammer head of the hammer crusher is in the direction of the falling of the material, from top to bottom. Strike material, small crushing space, low energy utilization;

2. From the connection mode between the hammer head and the rotor, the internal connection of the impact crusher is a rigid connection, which has a milling effect before the material is discharged, and the hammer head of the hammer crusher is freely suspended on the rotor. When encountering materials that are difficult to break, it is necessary to turn around and protect the hammer head from damage, but it does not break.

3. From the discharge port, the discharge port of the impact crushing device has no sliver control, the unloading is smooth, the production capacity is large, the product granularity is uniform, and it is easy to turn the bulk material into small pieces, but it is not easy to put small pieces. The material becomes smaller, the rotor speed is required to control the product particle size, and the product of the machine is mostly cubic and uniform in particle size, while the product size controlled by the hammer crusher is thinner than that of the impact crusher.

4. From the fixed way of the counterattack plate, inside the impact crusher, one end of the counterattack plate is suspended on the casing by the living hinge rod, and the other end is fixed by the hanging bolt. If it is in production, it is difficult to crush. When the material or iron piece is clamped between the rotor and the counterattack plate, the live hinge rod is pressed out by the pressure, and the counterattack plate is retracted, and the gap is increased, so that the difficult-to-break object can pass, and the rotor and the hammer head are protected from Damaged, then the counterattack plate returns to its original position under the action of its own weight, while the hammer crusher has no counterattack plate and safety device;

The article mainly introduces that you can recognize the impact crusher and the hammer break, and also analyze the difference between the two. The above describes the problem from four aspects, and compares and distinguishes between the two devices. Better understand the purpose and better help with the choice.

Equipment

B6X Belt Conveyor
B6X Belt Conveyor
XSD Sand Washer
XSD Sand Washer
F5X Vibrating Feeder
F5X Vibrating Feeder
S5X Vibrating Screen
S5X Vibrating Screen
K Track-type Mobile Crusher
K Track-type Mobile Crusher

Industry Knowledge

Request A Quotation